家用和類似用途的器具耦合器。第1部分:一般要求
Appliance couplers for household and similar general purposes - Part 1: General requirements
標準號：IEC 60320-1-2021
發布單位或類別：國際組織-國際電工委員會
發布日期：2021-07-27
CCS分類：K65 電工 - 電氣設備與器具 - 其它電氣器具
ICS分類：29.120.30 電工器件 - 插頭、插座、連接器
標準狀態：現行
起草單位：國際電工委員會
lEC 60320的本部分規定了兩極和兩極接地連接器具耦合器的一般要求，以及家用和類似用途的電氣設備與主電源的連接。
產品類別：電器
內容摘要：lEC 60320-1:2021規定了兩極和兩極接地接觸器具耦合器的一般要求，以及家用和類似用途的電氣設備與電源的連接。 本文件也適用于集成或并入器具的器具進口/器具出口。 第四版取消并取代了2015年發布的第三版和修訂版1:2018。這一版本是一次技術修訂。 與上一版相比，這一版包括以下重大技術變化: 在本文件中介紹必要的公差; 第2版的加熱測試在18.2中重新引入; 第21條插頭連接器增加溫升; 在23.3中更改了更好的可讀性; 更新橫向拉力測試23.6連接器/插頭連接器與單獨的前部部件; 對24.1球壓力試驗的修訂; 更新了第27條關于灼熱絲試驗的規定; 修訂測試序列的附錄C; 在+35℃以上環境溫度下使用的器具耦合器的附加試驗和要求附錄E。
引用標準：IEC 60068-2-31, Environmental testing – Part 2-31: Tests – Test Ec: Rough handling shocks, primarily for equipment-type specimens IEC 60068-2-60, Environmental testing – Part 2-60: Tests – Test Ke: Flowing mixed gas corrosion test IEC 60068-2-75, Environmental testing – Part 2-75: Tests – Test Eh: Hammer tests IEC 60112:2020, Method for the determination of the proof and the comparative tracking indices of solid insulating materials IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V IEC 60245 (all parts), Rubber insulated cables – Rated voltages up to and including 450/750 V IEC 60320-3:2014, Appliance couplers for household and similar general purposes – Part 3: Standard sheets and gauges IEC 60320-3:2014/AMD1:2018 IEC 60417, Graphical symbols for use on equipment (available from: http://www.graphical symbols.info/equipment) IEC 60664-1:2020, Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests IEC 60695‐2‐11:2014, Fire hazard testing – Part 2‐11: Glowing/hot‐wire based test methods –Glow‐wire flammability test method for end‐products (GWEPT) IEC 60695‐10‐2:2014, Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test method IEC 60730-2-11:2019, Automatic electrical controls – Part 2-11: Particular requirements for energy regulators IEC 60999-1:1999, Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) IEC 61032:1997, Protection of persons and equipment by enclosures – Probes for verification IEC 61058 (all parts), Switches for appliances"